Nilfsik Carpet Extractor Ride-On 56344201 105/105 Liters

Features
Upgrade from a fleet of dedicated use carpet extractors to a single high efficiency rider that offers vastly more productivity, better equipment utilization and faster cleaning. Realize productivity improvements of up to 400% over walk-behind sweepers and extractors. Clean better and clean smarter while reducing your total cost of ownership.
Only one machine offers the versatility to care for your carpeted surfaces according to your facility’s cleaning requirements. The Advance ES4000 lets you perform everything from daily touch ups of high traffic areas, to low-moisture cleaning, to periodic restorative extraction. All with complete control, simple, One-Touch™ operation and higher levels of productivity in one machine.
 
Cleans a 28 inch wide path; maneuverable through standard 36 inch doorways
Superior turning, visual and clearance ability. The ES4000 turns within a 63 inch (160 cm) radius
Dry Sweep Mode with vacuum suction, dust misting and two-stage filtration. Dust misting captures dust and eliminates the need for dust bags. Dry Sweep up to 35,000 sq. ft. per hour
Interim Mode allows cleaned carpet to be dry and ready for use in less than 30 minutes. Extract up to 14,000 sq. ft. per hour – a 400% improvement over walk-behind extractors
Pre-Treat Mode using any Green certified products from pre-spray to encapsulates. Pre-treat up to 21,000 sq. ft. per hour
Restorative Extraction Mode deep cleans carpet, up to 7,000 sq. ft. per hour
At just 65 dB A, the ES4000 is no louder than a person speaking; This makes daytime cleaning possible without disturbing facility occupants
Onboard detergent metering eliminates the need for pre-mixing solution and reduces chemical costs and environmental impact
Refillable cartridges are interchangeable with your choice of chemicals, including pre-spray, detergent, and encapsulates
The ES4000 Total Carpet Care System has received CRI-SOA certification

Specifications
CRI approval: Yes
Drive motor hp (W): 1.05 hp (780 W)
Sound level: 65 dB A IEC 60704-1
Brush motor hp (W): Dual 0.5 hp (373 W)
Brush speed (RPM): 900 RPM
Dimensions, L x W x H (cm): 61 in x 27.5 in x 51.7 in (61 cm x 70 cm x 131 cm)
Electrical system: 24 V 4 X 6 V batteries
Vacuum motor: Dual 3 stage bypass
Solution capacity: 28 gal
Recovery capacity: 28 gal
Turning radius - left or right: 62.5 in (1.59 m)
Cleaning path: 28 in Dual counter rotating brushes
Machine speed: 3.91 mph (6.3 kph) transport; 3.12 mph (4.8 kph) dry sweep; 275 ft/min (dry sweep mode); 130 ft/min (interim mode); 200 ft/min (pre-treat mode); 90 ft/min (restorative mode);
Waterlift/Airflow: 67 in H2O / 90 cfm
Flow Rate Interim Cleaning Mode: 0.3 gpm
Flow Rate Restorative Mode: 0.8 gpm
Machine weight: 587 lb (266 kg) without batteries; 1,447 lb (656 kg) with batteries and full tank
Solution pump: 100 psi diaphragm demand
Flow Rate Dry Sweep Mode: 0.1 gpm
Flow Rate Pre-Treat Mode: 0.9 gpm
Vacuum shoes: Dual pivoting laminar flow 40 lb down pressure
Max. coverage per tank: 21,778 sq ft (interim mode); 4,078 sq ft (restorative mode)
Adjustable steering: Included
One touch control panel: Included
Open machine design: Included
Onboard Chemical Mixing System: Included
Refillable cartridges: Included
Four Distinct Operational Modes: Included
 
Dimensions
width=70
height=131
length=154
 
Weight
656 kgs